Description
Boot Size: 17mm end I.D, X 60mm end I.D. X 81mm long
- The All Balls CV Boot material is compounded from an OEM grade DCR66 rubber that is formulated specifically for the demanding requirements of today’s ATV’s and UTV’s.
- Easier to install than most OEM and aftermarket boots.
- 40% higher tensile strength than conventional CV boot material, suitable for the high joint angles of today’s ATV’s and UTV’s
- 50% more abrasion resistant than conventional CV boot material to assure long life in today’s harsh off-road environments.
- Rubber compound is tested to -40°F to assure good performance and long life at low temperatures.
- Kit includes two stainless steel clamps that are designed to be tightened without the use of special tools.
- Lithium based Molybdenum Grease insures good lubrication for long CV joint life.
Check fitment in expandable chart below.
For years:
- Can-Am ATV’s – 1999, 2000, 2001, 2002, 2003, 2004, 2005
- Honda ATV’s – 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
- John Deere Trail Buck 650, 650EX, 650EXT – all years
- Kawasaki ATV’s – 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
- Kawasaki Mule 2510 & 3010 4×4 UTV’s – all years
- Kymco MXU 500i – all years
- Polaris ATV’s – 2006, 2007, 2008, 2009, 2010
- Suzuki ATV’s – 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
- Yamaha ATV’s – 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
